Dell POWEREDGE M1000E - Manual (Page 408)

376 Fabric OS Command Reference
53-1001764-02
fwSamShow
2
fwSamShow
Generates switch availability monitor (SAM) report.
Synopsis fwsamshow
Description Use this command to display a switch availability monitor (SAM) report. This report displays uptime
and downtime for each port and enables you to check if a particular port is failing more often than
the others. The information displayed includes total uptime, total downtime, number of faulty
occurrences, and total percent of downtime for each port.
Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
This command requires a Fabric Watch license.
Operands none
Examples To generate a SAM report on an eighty-port switch:
switch:user>
fwsamshow
Total Total Down Total
Port Type Up Time Down Time Occurrence Offline Time
(Percent) (Percent) (Times) (Percent)
===========================================================
0 U 0 0 0 100
1 U 0 0 0 100
2 U 0 0 0 100
3 U 0 0 0 100
4 U 0 0 0 100
5 U 0 0 0 100
6 F 100 0 0 0
7 U 0 0 0 100
8 U 0 0 0 100
9 U 0 0 0 100
10 U 0 0 0 100
11 U 0 0 0 100
12 U 0 0 0 100
13 U 0 0 0 100
14 U 0 0 0 100
15 U 0 0 0 100
16 F 100 0 0 0
17 F 100 0 0 0
18 F 100 0 0 0
19 F 100 0 0 0
20 U 00 0 100 100
21 U 0 0 0 100
22 U 0 0 0 100
23 U 0 0 0 100
24 U 0 0 0 100
25 U 0 0 0 100
26 U 0 0 0 100
27 U 0 0 0 100
28 U 0 0 0 100
29 U 0 0 0 100