Dell POWEREDGE M1000E - Manual (Page 241)

Fabric OS Command Reference 209
53-1001764-02
diagShow
2
diagShow
Displays diagnostics status.
Synopsis diagshow [--slot number][-uports itemlist][-bports itemlist][-use_bports value]
Description Use this command to display the diagnostics status for the specified list of blade or user ports.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following optional operands:
--
slot number Specify which slot to operate on. If this option is not specified, the default slot
0 is used. The default slot is designed to operate on fixed-port-count
products. By default, this command displays all user ports in the system.
-uports itemlist Specify a list of user ports to display.
-bports itemlist Specify a list of blade ports to display.
-use_bports value If this value is not 0 the diagnostics status for the blade ports specified in
-use_bports displays; otherwise, the user ports specified in -uports displays.
The default value is 0.
Examples To display diagnostic status on a switch blade:
switch:admin>
diagshow
Diagnostics Status: Fri Feb 08 15:25:24 2002
Slot: 1 UPORTS
Port BPort Diag Active Speed ......
0 15 OK UP 2G Auto ......
1 14 OK UP 2G Auto ......
2 13 OK UP 2G Auto ......
3 12 OK UP 2G Auto ......
4 31 OK UP 2G Auto ......
5 30 OK UP 2G Auto ......
6 29 OK UP 2G Auto ......
7 28 OK UP 2G Auto ......
8 47 OK UP 2G Auto ......
(output truncated)
See Also itemList