Dell POWEREDGE M1000E - Manual (Page 376)

344 Fabric OS Command Reference
53-1001764-02
firmwareShow
2
firmwareShow
Displays the Fabric OS versions on all firmware partitions in the system.
Synopsis firmwareshow
Description Use this command to display the FOS, SAS, and SA firmware versions. The command shows the
firmware versions on both the primary and secondary partitions of the storage device. When this
command is issued while a firmware download is in process, an appropriate warning message is
displayed,
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, “Using Fabric OS commands” and Appendix A, “Command
Availability” for details.
Operands none
Examples To display the firmware versions on a Brocade DCX while a firmware download is in progress:
switch:admin>
firmwareshow
Slot Name Appl Primary/Secondary Versions Status
-----------------------------------------------------------
4 FR4-18i FOS v6.4.0
v6.4.0
6 CP0 FOS v6.4.0 STANDBY
v6.4.0
7 CP1 FOS v6.4.0 ACTIVE *
v6.4.0
10 FA4-18 FOS v6.4.0
v6.4.0
SAS v3.4.0
v3.4.0
WARNING: Firmwaredownload is in progress.
To display the firmware version on a Brocade 4100:
switch:admin> firmwareshow
Appl Primary/Secondary Versions
------------------------------------------
FOS v6.4.0
v6.4.0
See Also firmwareDownload, firmwareDownloadStatus