Dell POWEREDGE M1000E - Manual (Page 918)

886 Fabric OS Command Reference
53-1001764-02
snmpConfig
2
--
enable mibCapability -mib_name mib_name
Enables the specified MIB noninteractively.
--
disable mibCapability -mib_name mib_name
Disables the specified MIB noninteractively. When used with the trap name
operand, only the specified trap is disabled.
-trap_name trap_name
Specifies the name of the trap to be enabled or disable. This operand is
optional. Use snmpConfig
--
show mibCapability for a listing of valid traps.
System Group Configuration Parameters
sysDescr The system description. The default value is Fibre Channel switch.
sysLocation The location of the system (switch). The default value is End User Premise.
The string must be at least 4 characters in length; the maximum length is
255 characters.
connUnitSensorStatusChange (5) 0x20 Enabled
connUnitPortStatusChange (6) 0x40 Enabled
FICON-MIB (FICON events) 0x1 Enabled
linkRNIDDeviceRegistration (1) 0x2 Enabled
linkRNIDDevicedeRegistration (2) 0x4 Enabled
linkLIRRListenerAdded (3) 0x8 Enabled
linkLIRRListenerRemoved (4) 0x10 Enabled
linkRLIRFailureIncident (5) 0x20 Enabled
HA-MIB (High-Availability events) 0x1 Enabled
fruStatusChanged (1) 0x2 Enabled
cpStatusChanged (2) 0x4 Enabled
fruHistoryTrap (3) 0x8 Enabled
FCIP-MIB (FCIP events) 0x1 Enabled
ISCSI-MIB (ISCSI events) 0x1 Enabled
iscsiTgtLoginFailure (1) 0x2 Enabled
iscsiTgtLoginFailure (2) 0x4 Enabled
iscsiTgtLoginFailure (3) 0x8 Enabled
IF-MIB (link status events) Enabled
linkUpTrap (3) 0x8 Enabled
linkdownTrap (4) 0x10 Enabled
BD-MIB (bottleneck detection events) Enabled
bdTrap (1) 0x2 Enabled
bdClearTrap (2) 0x4 Enabled
TABLE 25 SNMP Trap bit mask values
MIB Trap Name Bit mask Default