Errshow – Dell POWEREDGE M1000E User Manual
Page 258
226
Fabric OS Command Reference
53-1001764-02
errShow
2
errShow
Displays the error log messages with pagination.
Synopsis
errshow [-a |-r ]
Description
Use this command to display external error log messages one at a time. When executed without
operands, this command prints the error messages for the logical switch context in which the
command is executed. When used with the -a option, the command prints the error messages for
the entire chassis. The messages are displayed with page breaks. The -r operand displays the
messages in reversed order.
The output of this command is unique for each Control Processor (CP). On dual-CP processors this
command must be executed on each CP to obtain a complete record.
The following information displays in each message:
Start delimiter
Delimiter string for the start of a message.
Timestamp
Timestamp for the message.
Message ID
Message identifier.
External sequence number
Sequence number for the message
Security audit flag
Security audit message displayed as AUDIT.
Severity
Severity of the message. Valid values include INFO, WARNING, ERROR, and
CRITICAL.
Switch name
Switch name for the generator of this message, or “chassis”.
Message
Message body.
End delimiter
Delimiter string for the end of a message.
Note
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands
This command has the following operands:
-a
Displays messages for the entire chassis for a user with admin and chassis
permissions. This operand is optional; if omitted, the messages for the
current logical switch context are displayed.
-r
Displays messages in reversed order. This operand is optional; if omitted, the
messages display in the chronological order.
Examples
To display the error log for the chassis:
switch:admin>
errdump -a
Fabric OS: v6.2.0
2008/08/25-10:10:41, [SEC-1203], 9036, CHASSIS, INFO, Spir_67, Login
information : Login successful via TELNET/SSH/RSH. IP Addr: 10.106.7.62
[Type