Dell POWEREDGE M1000E - Manual (Page 446)

414 Fabric OS Command Reference
53-1001764-02
interopMode
2
To try to switch from 239 Domain ID mode in IM3 to IM 2 (this command fails unless you change
the domain offset as well to a value supported in IM2):
switch:admin>
interopmode --enable -mcdata
The switch effective and defined configuration
will be lost if interop Mode is changed.
Interop Mode or Domain Offset Will Be Changed
and switch will be Enabled
Do you want to continue? (yes, y, no, n): [no] y
InteropMode Offset: Failed to set offset 239 does not exist for IM2
rc 0, err 0, msg VÜÉ
See Also cfgMcdtMode, cfgSaveActiveToDefined