Dell POWEREDGE M1000E - Manual (Page 811)

Fabric OS Command Reference 779
53-1001764-02
portShow
2
+----------+-----------+-----+-----+----------+----------+----------+----------+
|Tunnel Num| Connection|LPort|RPort| OOO | OOO H | DupACK |Rtx DupACK|
+----------+-----------+-----------+----------+----------+----------+----------+
| Fast Rtx | F Rtx H | Slow Rtx | InFlt H |SlowStarts| Rtx TO |Rtx Rtx TO|
+----------+-----------+-----------+----------+----------+----------+----------+
| 0 CONTROL 4097 3225 0 0 0 0|
| 0 0 0 2 0 0 0|
+- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +
| 0 DATA 4098 3226 0 0 0 0|
| 0 0 0 1 0 0 0|
+-------------------------------------------------------------------------------+
To reset the TCIP statistics:
Switch:admin>
portshow fciptunnel ge1 0 -snapstart
Port: ge1
-------------------------------------------
Tunnel ID 0
Tunnel Description "This is a test Description of this tunnel"
Remote IP Addr 192.168.114.2
Local IP Addr 192.168.114.1
Remote WWN Not Configured
Local WWN 10:00:00:05:1e:38:84:65
Compression off
Fastwrite off
Tape Pipelining off
Committed Rate 900000 Kbps (0.900000 Gbps)
SACK on
Min Retransmit Time 100
Keepalive Timeout 10
Max Retransmissions 8
VC QoS Mapping off
DSCP Marking (Control): 0, DSCP Marking (Data): 0
VLAN Tagging Not Configured
TCP Byte Streaming on
Status : Active
Connected Count: 1
Uptime 5 minutes, 26 seconds
TCP data and control statistics snapshots have been reset for tunnel 0
To display the FC data path credit data:
switch:admin>
portshow fciptunnel 9/ge0 0 -credits
Slot: 9 Port: ge0
-------------------------------------------
Tunnel ID 0
Tunnel Description "This is a test Description of this tunnel"
Remote IP Addr 10.62.0.100
Local IP Addr 10.10.9.100
Remote WWN Not Configured
Local WWN 10:00:00:05:1e:39:d4:5a
Compression on
Fastwrite on
Tape Pipelining on
Uncommitted bandwidth, minimum of 1000 Kbps (0.001000 Gbps)
SACK on