beautypg.com

Dell POWEREDGE M1000E User Manual

Page 788

background image

756

Fabric OS Command Reference

53-1001764-02

portShow

2

The following optional commands are supported with -ficon; if omitted, the
usage for all parameters is displayed.

-help

Displays the command usage. You must specify a VE_Port number to
display the help functions, for example: portshow xtun 7/12 -ficon -help

-stats

Displays FICON statistics.

-fdpb adrs

Displays FICON ports or a specific FICON Device Path Block.

-fchb adrs

Displays FICON logical partitions (LPARs) or a specific FICON Channel
Control Block.

-fcub adrs

Displays FICON images (the same output as with -images) or a specific
FICON Control Unit Block.

-images

Displays FICON images.

-fdcb adrs

Displays FICON devices or specific FICON Device Control Block.

-tapeperf

Displays the emulated tape performance. When issued with -clear, this
command starts the emulated XRC performance monitor.

-xrcperf

Displays the emulated XRC Performance. When issued with -clear, this
command starts the emulated XRC performance monitor.

-structs

Displays FICON control block sizes.

-emul

Displays the current FICON emulation statistics.

-act

Displays the current Active Exchange information.

options

The following additional option is supported.

-clear

Resets the specified statistics. This operand is optional; it requires a
preceding command.

-mem adrs length

Specifies the SE memory length in words to display. The valid range for length
is 0-1024.

-dram2

Display the current usage of the dynamic memory allocator.

-pools

Display the current free pool allocation (FPA) buffer usage.

-tcb

Displays tunnel statistics.

-drshow

Displays the current Descriptor Ring status

-smem

Displays the current Shadow Memory data.

-rte

Displays the current Routing Info SE memory.

Examples

To display FCIP tunnel configuration parameters on the Brocade 7800:

switch:admin>

portshow fciptunnel 16

-------------------------------------------

Tunnel ID: 16

Tunnel Description:

Admin Status: Enabled

Oper Status: Up

Compression: On (Standard)

Fastwrite: Off

Tape Acceleration: Off