Dell POWEREDGE M1000E - Manual (Page 715)

Fabric OS Command Reference 683
53-1001764-02
portCfgShow
2
To display FCIP parameters on the Brocade 7800 (with IPv6 support):
switch:admin>
portcfgshow ge2
Mode: FCIP
Persistent Disable: OFF
Ipif configuration:
Interface IP Address NetMask MTU
----------------------------------------------------
0 192.168.2.10 255.255.255.0 1500
1 192.168.2.12 255.255.255.0 1500
2 192.168.2.13 255.255.255.0 1500
3 192.168.2.11 255.255.255.0 1500
4 192.168.2.110 255.255.255.0 1500
Interface IPv6 Address Len MTU
--------------------------------------------------------
0 20::2:10 64 1500
Iproute Configuration:
IP Address Mask Gateway Metric
------------------------------------------------------
192.168.42.0 255.255.255.0 192.168.2.250 0
IPv6ddress Len Gateway Metric
-------------------------------------------------------
20:42:: 64 20::2:250 0
Vlantag configuration:
-------------------------
Interface Address VlanId L2CoS
Destination Address
------------------------------------------------------
192.168.2.10 200 5
0.0.0.0
192.168.2.10 300 5
192.168.2.21
To display the VLAN tagging configuration only:
switch:admin> portcfgshow vlantag ge2
Port: ge2
Vlantag configuration:
-------------------------
Interface Address VlanId L2CoS
Destination Address
---------------------------------------------------
192.168.2.20 200 5
0.0.0.0
192.168.2.21 300 5
192.168.2.10