Dell POWEREDGE M1000E - Manual (Page 265)

Fabric OS Command Reference 233
53-1001764-02
fabricLog
2
fabricLog
Displays (all users) or manipulates (admin) the fabric log.
Synopsis fabriclog -s | --show
fabriclog -c | --clear
fabriclog -d | --disable
fabriclog -e | --enable
fabriclog -r size | --resize size
fabriclog -h | --help
Description Use this command to display, clear, disable, enable, or resize the fabric log.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, “Using Fabric OS commands” and Appendix A, “Command
Availability” for details.
Operands This command has the following operands:
-s | --show Displays the fabric log.
-c | --clear Clears the fabric log.
-d | --disable Disables the fabric log. By default, the fabric log is enabled.
-e | --enable Enables the fabric log.
-r size | --resize size
Changes the maximum number of log entries. The specified size has to be at
least 2 and a power of 2; otherwise, the command fails.
-h | --help Displays the command usage.
Examples To display the fabric log:
switch:admin>
fabriclog -s
Time Stamp Input and *Action S, P Sn,Pn Port Xid
=============================================================================
Wed Apr 6 01:08:52 2005
01:08:52.977 SCN Switch Offline A2,NA F2,NA NA NA
01:08:52.977 *Snd SW state: F2 F2,NA F2,NA NA NA
01:08:52.977 *Removing all nodes F2,NA F2,NA NA NA
01:08:52.977 *Cancel F_S_TOV Timer F2,NA F2,NA NA NA
01:08:52.977 *Cancel 2 * F_S_TOV Timer F2,NA F2,NA NA NA
01:08:52.977 *Cancel RDI Receive Timer F2,NA F2,NA NA NA
01:08:52.977 *Cancel RDI Send Timer F2,NA F2,NA NA NA
01:08:52.977 *Cancel 24 * F_S_TOV Timer F2,NA F2,NA NA NA
01:08:52.977 *Cancel EFP Flood Timer F2,NA F2,NA NA NA
01:08:52.977 *Cancel NTP Timer F2,NA F2,NA NA NA
01:08:52.977 *Cancel FAB_SIZE Timer F2,NA F2,NA NA NA
01:08:52.983 1) fabInqData F2,NA F2,NA NA NA
01:08:53.059 2) fabInqData F2,NA F2,NA NA NA
01:08:53.063 *Snd inquiry (1) F2,NA F2,NA NA NA
01:08:53.063 SCN Port Offline;g=0x3e F2,P3 F2,P0 0 NA
01:08:53.063 *Snd port state: P0 F2,P0 F2,P0 0 NA