Dell POWEREDGE M1000E - Manual (Page 215)

Fabric OS Command Reference 183
53-1001764-02
cryptoCfg
2
Notify SPM of Node Cfg
Operation succeeded.
To initialize an encryption engine:
SecurityAdmin:switch>
cryptocfg --initEE
This will overwrite previously generated identification
and authentication data
ARE YOU SURE (yes, y, no, n): y
Operation succeeded.
To register an encryption engine with the CP or chassis:
SecurityAdmin:switch>
cryptocfg -regEE
Operation succeeded.
To enable an encryption engine:
SecurityAdmin:switch>
cryptocfg --enableEE
Operation succeeded.
To disable an encryption engine:
SecurityAdmin:switch> c
ryptocfg --disableEE
Operation succeeded.
To export a KAC certificate from the group leader to an external host:
SecurityAdmin:switch> cryptocfg --export -scp -KACcert 192.168.38.245 mylogin kac_lkm_cert.pem
Password:
Operation succeeded.
To export a KAC certificate from the group leader to an attached USB device:
SecurityAdmin:switch>
cryptocfg --export -usb -KACcert kac_lkm_cert.pem
Password:
Operation succeeded.
To import a member CP certificate to the group leader:
SecurityAdmin:switch> cryptocfg --import -scp enc1_cpcert.pem 192.168.38.245 mylogin
/temp/certs/enc_switch1_cpcert.pem
Password:
To register a member node with the group leader:
SecurityAdmin:switch>
cryptocfg --reg -membernode 10:00:00:05:1e:39:14:00 enc_switch1_cert.pem
10.32.244.60
Operation succeeded.
To deregister a member node:
SecurityAdmin:switch> cryptocfg --dereg -membernode 10:00:00:05:1e:53:b6:80
Operation succeeded.
To generate a trusted link establishment package (TEP):
SecurityAdmin:switch>
cryptocfg --dhchallenge 10.33.54.231
Operation succeeded.
To issue the DH response to retrieve the TAP from the NetApp LKM appliance:
SecurityAdmin:switch>
cryptocfg --dhresponse 10.33.54.231