Perfshowporteemask – Dell POWEREDGE M1000E User Manual

Page 624

592

Fabric OS Command Reference

53-1001764-02

perfShowPortEEMask

Displays the current address mask for end-to-end performance monitors on a port.

Synopsis

perfshowporteemask [slot/]port

Description

Use this command to display the current mask shared across all end-to-end (EE) performance
monitors of a port. There are only two commands that can modify the value of the EE mask:
perfSetPortEEMask and perfCfgRestore.

The end-to-end mask has 12 fields:

TxSID Domain: on

TxSID Area: on

TxSID ALPA: on

TxDID Domain: on

TxDID Area: on

TxDID ALPA: on

RxSID Domain: on

RxSID Area: on

RxSID ALPA: on

RxDID Domain: on

RxDID Area: on

RxDID ALPA: on

The fields that are marked “on” are used to trigger end-to-end monitors. The default value of the EE
mask is all fields set to “on.”

Notes

This command requires an Advanced Performance Monitoring license.

This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and
GbE ports.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.

Operands

This command has the following operand:

slot

For bladed systems only, this operand specifies the slot number of the port
on which the monitor is to be displayed, followed by a slash (/).

port

Specifies the number of the port on which the monitor is to be displayed,
relative to its slot for bladed systems. Use switchShow for a list of valid ports.

Examples

To display the end-to-end mask on a port:

switch:admin>

perfshowporteemask 2/4

The EE mask on port 20 is set by application NONE