Dell POWEREDGE M1000E - Manual (Page 864)

832 Fabric OS Command Reference
53-1001764-02
secCertUtil
2
-login login name
Specifies the login name for the server.
-password password
Specifies the password for the user account. When using SCP, for
security reasons, do not enter a password on the command line. Use the
interactive version instead.
import Imports a certificate. Use this command to import a certificate from the
server or to download a certificate issued by a CA after sending the CSR to
the CA. Specify one of the following certificates:
-ldapcacert Imports an LDAP CA certificate.
-fcapswcert Imports an FCAP switch certificate.
-fcapcacert Imports an FCAP CA certificate.
-config cacert Imports a CA certificate.
-config swcert [-nowarn]
Imports an SSL certificate. If -nowarn is specified, the SSL certificate import
is blocked without warning if the certificate is invalid. If -nowarn is omitted,
you are prompted for confirmation before importing an invalid switch
certificate. However, you will be able to import the invalid certificate. The
-nowarn option effectively prevents you from importing an invalid swcert
certificate.
-enable https Enables secure https. Optionally use this operand with -config swcert
only.
The following operands are optional with import; if omitted, the command prompts
interactively for your input.
-protocol ftp | scp
Specifies the protocol as either FTP or SCP.
-ipaddr IP address
Specifies the IP address of the remote host.
-remotedir remote directory
Specifies the remote directory. Provide a fully qualified path name.
-certname certificate name
Specifies the certificate name.
-login login name
Specifies the login name for the server.
-password password
Specifies the password for the user account. When using SCP, for
security reasons, do not enter a password on the command line. Use the
interactive version instead.
show Lists all existing PKI-based certificates on the switch. The following operands
are optional and exclusive.
-ldapcacert Lists LDAP certificates.
-fcapall Indicates whether FCAP related files exist or are empty.