Sensorshow – Dell POWEREDGE M1000E User Manual

Page 896

864

Fabric OS Command Reference

53-1001764-02

sensorShow

Displays sensor readings.

Synopsis

sensorshow

Description

Use this command to display the current temperature, fan, and power supply status and readings
from sensors located on the switch. The actual location of the sensors varies, depending on the
switch type.

Note

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command
Availability" for details.

Operands

none

Examples

To view all sensor values:

switch:admin>

sensorshow

sensor 1: (Temperature) is Ok, value is 39 C

sensor 2: (Temperature) is Absent

sensor 3: (Temperature) is Absent

sensor 4: (Temperature) is Absent

sensor 5: (Temperature) is Ok, value is 26 C

sensor 6: (Temperature) is Ok, value is 27 C

sensor 7: (Fan ) is Ok, speed is 2537 RPM

sensor 8: (Fan ) is Ok, speed is 2537 RPM

sensor 9: (Fan ) is Ok, speed is 2556 RPM

sensor 10: (Power Supply ) is Ok

sensor 11: (Power Supply ) is Absent

sensor 12: (Power Supply ) is Ok

sensor 13: (Power Supply ) is Absent