Dell POWEREDGE M1000E - Manual (Page 441)

Fabric OS Command Reference 409
53-1001764-02
interfaceShow
2
attLsuOut Number of attempted transmissions of LSUs to the neighbor switch.
nLsuOut Number of LSUs transmitted to the neighbor switch.
attLsaOut Number of attempted transmissions of LSAs to the neighbor switch.
nLsaOut Number of LSAs transmitted to the neighbor switch.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, “Using Fabric OS commands” and Appendix A, “Command
Availability” for details.
Operands This command has the following operands:
slot For bladed systems only, specify the slot number of the port to be displayed,
followed by a slash (/).
port Specify the number of the port to be displayed, relative to its slot for bladed
systems. Use switchShow for a list of valid ports. This operand is optional; if
omitted, the interface information for all ports is displayed.
When invoked without operands, this command displays the interface information for all ports on
the switch (including non-E_Ports).
Examples To display FSPF interface information:
switch:user>
interfaceshow 1/4
idbP = 0x1008b3d0
Interface 4 data structure:
nghbP = 0x1008c668
ifNo = 4
masterPort = 4 (self)
defaultCost = 500
cost = 500
delay = 1
lastScn = 16
lastScnTime = Apr 02 20:01:44.458
upCount = 2
lastUpTime = Apr 02 20:01:44.458
downCount = 1
lastDownTime = Apr 02 20:01:09.050
downReason = 2
iState = UP
Neighbor 4 data structure:
state = NB_ST_FULL
lastTransition = Apr 02 20:01:44.512
nghbCap = 0x0
nghbId = 100
idbNo = 4
remPort = 52
nflags = 0xf
initCount = 1
lastInit = Apr 02 20:01:44.460
firstHlo = Apr 02 20:01:44.473
nbstFull = Apr 02 20:01:44.512