Dell POWEREDGE M1000E User Manual
Page 175
Fabric OS Command Reference
143
53-1001764-02
configureChassis
2
Custom Attributes
lists custom attributes that may be modified.
config Index
OEM custom configuration. This attribute is for internal use only.
System Settings
The following system-related parameters are configurable on a Virtual Fabric-aware switch.
system.blade.bladeFaultOnHwErrMsk
If this field is set to a value other than 0, then any nonfatal HW ASIC data
parity error causes the problem blade to be powered off.
system.cpuLoad
Sets a threshold to define internally when the CPU is busy. The default
threshold is 121, which represents a CPU instantaneous load average of 1.21
in the uptime or top command. The range is 10 through 121 (representing
CPU load thresholds of .10 through 1.21).
Examples
To enable signature validation for downloading firmware:
switch:admin>
configurechassis
Configure...
cfgload attributes (yes, y, no, n): [no] \fBy\fR
Enforce secure config Upload/Download (yes, y, no, n): [no]
Enforce signature validation for firmware (yes, y, no, n): [no]
Custom attributes (yes, y, no, n): [no] \fBy\fR
Config Index (0 to ignore): (0..1000) [0]
system attributes (yes, y, no, n): [no] \fBy\fR
system.blade.bladeFaultOnHwErrMsk: (0x0..0xffff) [0x0]
system.cpuLoad: (10..121) [121]
See Also
configDefault, configShow, chassisEnable, chassisDisable, configure, ipAddrSet,
portCfgLongDistance, switchDisable, switchEnable, upTime
TABLE 15
Configurable custom attributes
Application
Attribute
Type
Default
Range
Custom
Config Index (0 to ignore):
Number
0
0-10000
TABLE 16
System Settings
Field
Type
Default
Range
system.blade.bladeFaultOnHwErrMsk
Number
0x0
0x0 to 0xffff
system.cpuLoad
Number
121
10 to 121