Dell POWEREDGE M1000E - Manual (Page 62)

30 Fabric OS Command Reference
53-1001764-02
ag
2
switch:admin>
ag --modeshow
Access Gateway mode is NOT enabled.
AG group policy commands
To show current policies:
switch:admin>
ag --policyshow
AG Policy Policy Name State
----------------------------------------------------------
Port Grouping pg Enabled
Auto Port Configuration auto Disabled
Advanced Device Security ads Disabled
WWN Based Load Balancing wwnloadbalance Disabled
----------------------------------------------------------
To enable a port grouping policy:
switch:admin>
ag --policyenable pg
To disable a port grouping policy
switch:admin> ag --policydisable pg
To enable auto port configuration policy when both policies are disabled and the switch is already
disabled:
switch:admin>
ag --policyenable auto
All Port related configurations will be lost.
Please save the current configuration using configupload.
Do you want to continue? (yes, y, no, n): [no] y
To disable auto port configuration policy when the switch is disabled:
switch:admin>
ag --policydisable auto
Default factory settings will be restored.
Default mappings will come into effect.
Please save the current configuration using configupload.
Do you want to continue? (yes, y, no, n): [no] y
Access Gateway configuration has been restored to factory default
To enable the ADS policy:
switch:admin> ag --policyenable ads
To disable the ADS policy:
switch:admin>
ag --policydisable ads
To enable the WWN load balancing policy:
switch:admin>
ag --policyenable wwnloadbalance
To disable the WWN load balancing policy:
switch:admin>
ag --policydisable wwnloadbalance