Dell POWEREDGE M1000E - Manual (Page 939)

Fabric OS Command Reference 907
53-1001764-02
supportFtp
2
Examples To set the FTP parameters:
switch:admin>
supportftp -s -h 1080::8:800:200C:417A -u njoe -p password -d support
supportftp: ftp parameters changed.
To display the FTP parameters:
switch:admin>
supportftp
Host IP Addr: 1080::8:800:200C:417A
User name: njoe
Remote Dir: support
FTP Auto check: Off
To set FTP parameters interactively:
switch:admin>
supportftp -s
Host IP Addr[1080::8:800:200C:417A]:
192.168.67.126
User Name[njoe]:
admin
Password[********]: password
Remote Dir[support]:
temp
Auto file transfer parameters changed
To set the time interval at which the FTP server connectivity is checked:
switch:admin>
supportftp -t 24
supportftp: ftp check period changed.
To enable auto file transfer:
switch:admin>
supportftp -e
support auto file transfer enabled.
To disable auto file transfer:
switch:admin>
supportftp -d
support auto file transfer disabled.
See Also supportSave, supportShow, traceDump