Dell POWEREDGE M1000E - Manual (Page 347)

Fabric OS Command Reference 315
53-1001764-02
ficonClear
2
ficonClear
Clears the records from the specified FICON database.
Synopsis ficonclear database
Description Use this command to remove records from the local FICON database. The command effect
depends on the specified database.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, “Using Fabric OS commands” and Appendix A, “Command
Availability” for details.
Operands This command has the following operand:
database Specifies the name of the FICON database. The databases are:
RLIR Remove all entries from the link incidents database including implicit link
incidents (ILIR).
RNID Remove all the “not current” entries from the device node identification
database. The entries are for devices that were previously connected but are
no longer online. Note that “current” entries are not removed from the RNID
database.
Examples To clear the RLIR database:
switch:user>
ficonclear RLIR
successfully clear local RLIR Database.
To clear the RNID database:
switch:user>
ficonclear RNID
successfully clear not current
entries from local RNID Database.
See Also ficonHelp, ficonShow