Dell POWEREDGE M1000E - Manual (Page 816)

784 Fabric OS Command Reference
53-1001764-02
portStats64Show
2
stat64_rateTxPeakByte
Tx peak Byte rate (Bps).
stat64_rateRxPeakByte
Rx peak Byte rate (Bps).
stat64_PRJTFrames Number of P_RJT frames transmitted.
stat64_PBSYFrames Number of P_BSY transmitted.
stat64_inputBuffersFull
Number of occasions on which input buffers are full.
stat64_rxClass1Frames
Number of class 1 frames received.
The following counters provided by SNMP are displayed with portStats64Show -long on switches
running Fabric OS v6.4.0 or later:
swConnUnitZeroTenancy, zero_tenancy
Number of times a zero tenancy occurred.
swConnUnitFLNumOfTenancy , fl_tenancy
Number of times the FL_Port had a loop tenancy.
swConnUnitNLNumOfTenancy , nl_tenancy
Number of times any NL_Port had a loop tenancy.
swConnUnitStopTenancyStarvation, Starve_stop
Number of loop tenancies stopped due to starvation.
swConnUnitOpend, opened
Number of times the FL_Port entered OPENED state.
swConnUnitTransferConnection, transfer
Number of times the FL_Port entered TRANSFER state.
swConnUnitOpen , open
Number of times the FL_Port entered OPEN state.
swConnUnitInvalidARB, er_inv_arb
Number of invalid arbitrated loops (ARBs).
The following counters are platform-specific and applicable only to Condor2 and Goldeneye2 ASICs
only. Refer to the Fabric OS Troubleshooting and Diagnostics Guide, Appendix A, for a table that
correlates ASIC type with switch models.
swConnUnitFTB1Miss , er_type1_miss
Number of frames with FTB type 1 miss.
swConnUnitFTB2Miss , er_type2_miss
Number of frames with FTB type 2 miss.
swConnUnitFTB6Miss, er_type6_miss
Number of frames with FTB type 2 miss.
swConnUnitZoneMiss, er_zone_miss
Number of frames with hard zoning miss
swConnUnitLunZoneMiss, er_lun_zone_miss
Number of frames with logical unit number (LUN) zoning miss.