Errfilterset – Dell POWEREDGE M1000E User Manual

Page 256

224

Fabric OS Command Reference

53-1001764-02

errFilterSet

Sets a filter for an error log destination.

Synopsis

errfilterset [-d “destination"][-v severity]

Description

Use this command to set a filter for an error log destination. A filter is set based on the severity level
of the messages.

If no parameters are specified, this command displays the filters that are currently in use.

Note

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.

Operands

This command has the following operands:

-d destination

Specifies the destination for the filter. The string console is the only valid
value at this time.

-v severity

Specifies the minimum severity level of the message to pass through the
filter. Valid values are INFO, WARNING, ERROR, or CRITICAL. Input values are
not case-sensitive.

Examples

To display the current filter settings:

switch:admin>

errfilterset

console: filter severity = WARNING

To set the filter severity level for the console:

switch:admin>

errfilterset -d console -v warning