Fluke Networks CertiFiber Pro Users Manual User Manual
Page 85
Chapter 3: How to Certify Twisted Pair Cabling
DSX CableAnalyzer Connectors, Keys, and LEDs
63
TALK LED comes on when the talk function is on. To adjust the
volume, press or the button on the headset’s microphone.
LOW BATTERY LED comes on when the battery is low. The LEDs
also have these functions:
Battery gauge (see Figure 3 on page 15)
Volume indicator for the TALK function
Progress indicator for software updates
: Starts a test.
: Power key
: Press to use the headset to speak to the person at
the other end of the link. Press again to adjust the volume. To
turn off the talk function, hold down .
Connector for the AC adapter. The LED is red when the battery
charges, and green when the battery is fully charged. The LED is
yellow if the battery will not charge. See “Charge the Battery”
on page 13.
Micro-AB USB port: This USB port lets you connect the tester to a
PC so you can upload test results to the PC.
Headset jack