Fluke Networks CertiFiber Pro Users Manual - Manual (Page 383)

Chapter 16: Maintenance
Update the Software
361
2 Download the Versiv update file from the Fluke Networks
website, or contact Fluke Networks to get the update by
other methods. Save the file to your hard drive.
3 Connect the Micro-AB USB port on the tester to a USB port on
the PC. See Figure 133.
4 On the LinkWare menu, select Utilities > (name of the module)
> Software Update, find and select the update file, then click
Open. LinkWare saves the update file on the tester, then the
tester installs the file. On a remote tester, the LEDs show the
progress of the installation.
5 The tester reboots when the update is completed. To make sure
the update was installed correctly, tap the TOOLS icon on the
home screen, tap Version Information, then make sure the
Versiv main unit and the module show the correct version.
6 If you have a Versiv remote, do steps 3 through 5 again for
the remote tester.
GPU46.EPS
Figure 133. How to Connect the Tester to a PC
Micro-AB USB
port
Type A
USB port
AC adapter