Fluke Networks CertiFiber Pro Users Manual - Manual (Page 83)

Chapter 3: How to Certify Twisted Pair Cabling
DSX CableAnalyzer Connectors, Keys, and LEDs
61
  : Starts a test. To start a test, you can also tap TEST on the
display.
  : Power key
  : Press  to go to the home screen.
 Connector for the AC adapter. The LED is red when the battery
charges, and green when the battery is fully charged. The LED is
yellow if the battery will not charge. See “Charge the Battery”
on page 13.
 RJ45 connector: For functions available in future software
releases.
 Micro-AB USB port: This USB port lets you connect the tester to a
PC so you can upload test results to the PC and install software
updates in the tester.
 Type A USB port: This USB host port lets you save test results on a
USB flash drive.
 Headset jack