Copy project settings to other testers – Fluke Networks CertiFiber Pro Users Manual User Manual
Page 365
Chapter 14: Projects
How to Manage Projects
343
Note
The tester reads only USB drives that use the FAT
format.
1
Connect a USB flash drive to the type A USB port. The tester
makes a bell sound when it detects the drive.
2
On the home screen, tap the PROJECT panel.
3
On the PROJECT screen, tap TRANSFER.
4
On the TRANSFER PROJECTS screen, select a function:
Export: On the EXPORT PROJECTS screen, select the
projects you want to export to the flash drive, then tap
EXPORT.
Import: On the IMPORT PROJECTS screen select the
projects you want to import from the flash drive, then tap
IMPORT.
Delete: On the DELETE PROJECTS screen select the
projects you want to delete on the flash drive, then tap
DELETE.
Copy Project Settings to Other Testers
To copy the settings in a project to other Versiv units, use the
Read Project Setups and Write Project Setups utilities in LinkWare
software. You can use LinkWare to read project settings from a
tester or from a project you exported to a flash drive.