Fluke Networks CertiFiber Pro Users Manual - Manual (Page 176)

Versiv Cabling Certification Product Family
Technical Reference Handbook
154
To Clean Connector Ends
1 Use a video probe to inspect the connector. If it is dirty,
continue to step 2.
2 Touch the tip of a fiber optic solvent pen or swab soaked in
solvent to a lint-free dry wipe or fiber cleaning card.
3 Wipe the connector end-face across the solvent spot, then
back and forth once across the dry area of the wipe or card.
4 Use a video probe to inspect the connector. If necessary, clean
and inspect the connector again.
Note
For some connector types, such as VF-45, it is
necessary to use a different method to clean the
endface.