Fluke Networks CertiFiber Pro Users Manual - Manual (Page 333)

Chapter 14: Projects
Tutorial: Make a New Project
311
 Results: A summary of the test results in the project:
: The number of tests that failed.
: The number of tests that passed.
: The number of results from tests on twisted pair cable that
have measurements within the range of accuracy uncertainty for
the tester. See “PASS*/FAIL* Results” on page 79.
To see the results, tap the panel.
 Test Setup: The tests that are necessary for each cable in the
project.
To add a test to the project, tap NEW TEST.
For information about twisted pair test settings, see Chapter 3.
For information about OTDR test settings, see Chapter 9.
 Cable ID Sets: The sets of IDs the tester can use for the names of
test results. Each ID set is for either copper or fiber cable.
To add a set of IDs to the project, tap NEW ID SET. See “How to
Make ID Sets” on page 337.
 To use a different project, tap CHANGE PROJECT, then tap a
project.
To make a new project, tap CHANGE PROJECT, then tap NEW
PROJECT.
 TRANSFER lets you export or import projects to or from a flash
drive, and delete projects on the flash drive. The project data
includes all project settings and test results.
 MANAGE lets you rename, copy, or delete a project that is in the
tester:
 Rename: Lets you give the project a new name. The tester
saves all the settings and test results in the project with
the new name.
 Copy: Lets you use the settings in the project to start a
new project. The tester does not put test results into the
new project.