Fluke Networks CertiFiber Pro Users Manual - Manual (Page 4)

ii
Versiv Cabling Certification Product Family
Technical Reference Handbook
Power Line Frequency ............................................. 26
Display Brightness .................................................... 26
Import User Preferences from a File ....................... 26
Overview of Memory Functions .................................... 27
How to Install a Strap .................................................... 28
How to Remove or Install a Module ............................. 28
About LinkWare and LinkWare Stats Software ........... 30
Chapter 2 Get Started
Tutorial: Certify Twisted Pair Cabling ........................... 31
Step 1: See How Much Memory is Available .......... 32
Step 2: Set Up a Twisted Pair Test ........................... 32
Step 3: Turn Off the Auto Save Function ............... 34
Step 4: Do an Autotest ............................................ 34
Step 5: Look at the Results ...................................... 34
Step 6: Save the Results ........................................... 36
Tutorial: Certify Fiber Optic Cabling ............................. 36
Step 1: See How Much Memory is Available .......... 36
Step 2: Set Up a Loss/Length Test ........................... 38
Step 3: Turn Off the Auto Save Function ............... 39
Step 4: Set the Reference ........................................ 40
Step 5: Measure the Loss of the Test
Reference Cords You Will Add ................................ 42
Step 6: Do an Autotest in Smart Remote Mode .... 43
Step 7: Look at the Results ...................................... 44
Step 8: Save the Results ........................................... 44
Tutorial: Do a Bi-Directional OTDR Test ....................... 45
Step 1: See How Much Memory is Available .......... 46
Step 2: Set Up an OTDR Test ................................... 46
Step 3: Turn Off the Auto Save Function ............... 47