Fluke Networks CertiFiber Pro Users Manual - Manual (Page 47)

Chapter 1: Get Acquainted
Set User Preferences
25
Units for Length Measurements
1 On the home screen, tap the TOOLS icon.
2 In the Length panel, tap the control to show ft or m.
3 To go back to the home screen, tap or press .
Power-Down and Backlight Timeout Periods
To increase the battery life, the tester can turn off the backlight
and automatically turn off the tester when you do not press any
keys for a specified period.
When the backlight timeout period ends, the brightness of the
backlight decreases. After one more timeout period, the display
turns off. Touch the display to turn it on.
1 On the home screen, tap the TOOLS icon.
2 Tap Timeout Period, then tap Backlight or Power Down.
3 Tap a time. To always keep the backlight or tester on, tap
Disabled.
4 To go back to the home screen, tap two times or press
 .
The Versiv remote tester turns off after 60 minutes of inactivity.
You cannot change this setting.
Audible Tone
You can enable or disable the tones the tester makes during tests
and when you press keys. If you connect a remote tester to the
main tester through DSX or CertiFiber Pro modules, the remote
uses the main tester’s setting.
1 On the home screen, tap the TOOLS icon.
2 In the Audible Tone panel, tap the control to show On or Off.
3 To go back to the home screen, tap or press .