Fluke Networks CertiFiber Pro Users Manual - Manual (Page 33)

Chapter 1: Get Acquainted
Versiv Unit Connectors, Keys, and LEDs
11
 Type A USB port: This USB host port lets you save test results on a
USB flash drive or connect a video probe to the tester.
 Headset jack.
  : Starts a test. To start a test, you can also tap TEST on the
display.
  : Power key.
  : Press  to go to the home screen.
 Connector for the ac adapter. The LED is red when the battery
charges, and green when the battery is fully charged. The LED is
yellow if the battery will not charge. See “Charge the Battery”
on page 13.
 RJ45 connector: For functions available in future software
releases.