Fluke Networks CertiFiber Pro Users Manual - Manual (Page 24)

Versiv Cabling Certification Product Family
Technical Reference Handbook
2

Safety Information
Table 1 shows the international electrical symbols used on the
tester or in this manual. Symbols for certifications and compliance
are on page 389.
 : This key turns the tester on and off.
For the Versiv Main Unit
 Warning 
To prevent possible fire, electric shock, or personal
injury:
 Use only ac adapters approved by Fluke Networks
for use with the tester to supply power to the tester
and charge the battery.
 Do not put the battery pack in a fire or an
environment with temperatures more than 140 °F
(60 °C).
 Do not use the tester in damp or wet environments.
 Do not short-circuit or disassemble the battery pack.
Table 1. International Electrical Symbols
 Warning: Risk of fire, electric shock, or personal injury.

Warning or Caution: Risk of damage or destruction to equipment
or software. See explanations in the manuals.
 Do not connect this equipment to public communications networks,
such as telephone systems.
 Warning: Class 1 (OUTPUT port) and Class 2 (VFL port) lasers. Risk of
eye damage from hazardous radiation.

Do not put products containing circuit boards into the garbage.
Dispose of circuit boards in accordance with local regulations.