Fluke Networks CertiFiber Pro Users Manual - Manual (Page 412)

Versiv Cabling Certification Product Family
Technical Reference Handbook
390
Internal Memory for Test Results
Typical capacity for the internal memory depends on the type of
tests you save:
 Twisted pair tests: Approximately 12,700 Cat 6A Autotest
results, with plot data included.
 Loss/length fiber tests: Approximately 30,000 fiber test results
 OTDR tests: Approximately 2000 OTDR tests on fiber links
with an average length of 2 km, and up to 5000 tests for
lengths less than 2 km.
The capacity available for test results also depends on the space
used by the software and custom test limits in the tester.
The number of test records you can save decreases if you save
more tests in each record, or if you save tests that use more
memory. For example, twisted pair results saved with plot data
use more memory than results without plot data.
USB Flash Drive
You can upload test results to a USB flash drive to make more
internal memory available.
Note
The tester reads only USB drives that use the FAT
format.
Serial Interfaces
 USB host interface with a type A USB port
 USB interface with a Micro-AB USB port
RJ45 Connector
For functions available in future software releases.