Fluke Networks CertiFiber Pro Users Manual - Manual (Page 15)

xiii
List of Figures
Figure Page
1. Versiv Main Unit Connectors, Keys, and LEDs............... 10
2. Versiv Remote Unit Connectors, Keys, and LEDs .......... 12
3. LEDs Show the Remote’s Battery Status........................ 15
4. Connections to See the Status of 
the Remote’s Battery ...................................................... 16
5. How to Zoom the Screen................................................ 18
6. The HOME Screen with No Module Attached .............. 20
7. The Keyboards for Text Entry ........................................ 23
8. How to Install a Strap and Use the Hand Strap ............ 28
9. How to Remove and Install a Module ........................... 29
10. Equipment for the Twisted Pair Certification Tutorial. 31
11. Examples of Twisted Pair Autotest Results Screens ...... 35
12. Equipment for the Fiber Certification Tutorial............. 37
13. Connections for Smart Remote Mode
(1 Jumper Method, Multimode Fiber) ........................... 41
14. Examples of Fiber Autotest Results Screens .................. 44
15. Equipment for the OTDR Tutorial ................................. 45
16. Connections for Launch + Tail Compensation .............. 49
17. OTDR Connected with Launch and Tail Cords .............. 50
18. Examples of the EventMap, TABLE, 
and TRACE Screens ......................................................... 51
19. FIX LATER, TEST AGAIN, and TEST Buttons
and the TEST Key ............................................................ 53
20. Main DSX Tester Connectors, Keys, and LEDs ............... 60
21. Remote DSX Tester Connectors, Keys, and LEDs........... 62