Fluke Networks CertiFiber Pro Users Manual User Manual
Page 39
Chapter 1: Get Acquainted
How to Use the Touchscreen
17
Caution
For correct operation and to prevent damage to the
touchscreen:
Touch the screen only with your fingers or with a
stylus that is made for projected capacitance
touchscreens. Do not use too much force.
Do not touch the screen with sharp objects.
Note
The touchscreen will not respond if you tap it with
your fingernail or an incorrect type of stylus or if
you wear non-conductive gloves.
To use the touchscreen
To select an item on the screen, tap the item lightly with your
fingertip.
To scroll a screen, lightly touch the screen then move your
fingertip in the direction you want the screen to move.
On screens that show a plot, trace, or FiberInspector image,
use the pinch and reverse-pinch gestures to change the
magnification on the screen. See Figure 5.
When you zoom a trace or plot horizontal and vertical zoom
controls show on the screen. These controls let you change the
magnification on the distance and decibels scales independently.
You can zoom in to a maximum magnification factor of 128:1.
On screens that show a plot, trace, or FiberInspector image,
you can drag some items, such as the measurement cursor on
a plot or trace or the image on a FiberInspector screen.
To clean the touchscreen, turn off the tester, then use a soft, lint-
free cloth that is moist with a mild detergent.
Caution
When you clean the touchscreen, do not let liquid
get under the plastic around the touchscreen.