Fluke Networks CertiFiber Pro Users Manual - Manual (Page 326)

Versiv Cabling Certification Product Family
Technical Reference Handbook
304
To replace a result with a result that uses different test settings
1 Turn off Auto Save.
2 Make sure that the home screen shows the project that
contains the result you want to replace.
3 Select the necessary test settings.
4 Do the test, tap FIX LATER (if the test failed) or SAVE (if the
test passed), then enter the ID of the saved result.
5 The tester asks you if you want to overwrite the results. Tap
Yes.
Delete, Rename, and Move Results
Before you delete, rename, or move results, select the project that
contains the results and go to the MANAGE RESULTS screen:
1 On the home screen, tap the RESULTS icon. The RESULTS
screen shows the results in the active project.
2 To see the results in another project, tap VIEW ALL, then tap a
project.
3 Tap MANAGE to see the MANAGE RESULTS screen.
To delete results
1 On the MANAGE RESULTS screen, select the results you want
to delete.
To select all the tests that failed or all the tests that passed, tap
Select All Retests or Select All Passes.
2 Tap DELETE, then tap DELETE in the confirmation dialog.
To rename results
1 On the MANAGE RESULTS screen, select one result to rename.
2 Tap RENAME.
3 Enter a new name, then tap DONE.