Fluke Networks CertiFiber Pro Users Manual - Manual (Page 26)

Versiv Cabling Certification Product Family
Technical Reference Handbook
4
For DSX Modules and Twisted Pair Adapters

Warning

To prevent possible fire, electric shock, or personal
injury:
 Do not connect the tester to telephony inputs,
systems, or equipment, including ISDN inputs.
Doing so is a misapplication of this product, which
can cause damage to the tester and make a possible
shock hazard for the user.
 Always turn on the tester before you connect it to a
link. Doing so activates the tester’s input protection
circuitry.
 Caution
To prevent damage to the tester or cables under
test, to prevent data loss, and to make sure your
test results are as accurate as possible:
 Do not connect the tester to an active network.
Doing so causes unreliable test results, can disrupt
network operations, and can cause damage to the
tester.
 Connect to the adapters only plugs that are made
for Ethernet applications, such as RJ45, ARJ45, and
Cat 7 plugs. Other types of plugs, such as RJ11
(telephone) plugs, can cause permanent damage to
the jacks.
 To make sure your test results are as accurate as
possible, do the reference procedure every 30 days.
See “About Link Interface Adapters” on page 67.
 Do not operate portable transmitting devices, such
as walkie-talkies and cell phones, during a cable
test. Doing so can cause errors in test results.
 For permanent link adapters, do not twist, pull on,
pinch, crush, or make kinks in the cables. See Figure
24 on page 69.