Figure 126, In figure 126) – Fluke Networks CertiFiber Pro Users Manual User Manual
Page 343
Chapter 14: Projects
Tutorial: Make a New Project
321
GPU01.EPS
Figure 126. CHANGE ID Screen for Tests on Twisted Pair and Single Fibers
Note
The CHANGE ID screen for Smart Remote Mode
shows the Input Fiber ID and Output Fiber ID. See
130 on page 331.
Auto Save: When a test is completed, the tester automatically
saves the results with the next ID from the ID set. If the test
failed, you can do the test again for the same ID, or go to the
next cable. If you go to the next cable, the tester shows the
failed test at the top of the list of results for the ID set.
Next ID: The Next ID is the ID that the tester gives to the next
results you save.
A
C
B
F
E
G
H
D
I