CANOGA PERKINS CanogaOS Command Reference - Manual (Page 845)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 845 of 855
Usage
Examples
The following is sample output from the show snmp-server trap-receiver command:
Switch# show snmp-server trap-receiver
Target-ipaddress udpport version pdu-type community
===========================================================
1.1.1.1 234 v2c inform public
1.1.1.1 234 v2c trap public
1.1.1.1 234 v1 trap public
Related Commands
44.23 show snmp-server usm-user
To display information about the configured characteristics of Simple Network Management Protocol
(SNMP) users, use the show snmp-server usm-user command in privileged EXEC mode.
Command Syntax
show snmp-server usm-user [username]
username (Optional) Name of a specific user or users about which to display SNMP
information.
Command Mode
Privileged EXEC
Usage
An SNMP user must be part of an SNMP group, as configured using the snmp-server usm-user
command.
Examples
The following is sample output from the show snmp-server usm-user command:
Switch# show snmp-server usm-user user1
EnginedID: 01234567890123456789
User Name: user1
Auth Protocol:
priv Protocol:
Storage Type: nonvolatile
Row status: active