CANOGA PERKINS CanogaOS Command Reference - Manual (Page 63)

CanogaOS Command Line Reference
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 63 of 855
4.7 privilege
Use this command to assign default privilege level for line.
To return the privilege level to default value, use the no form of this command.
Command Syntax
privilege level level
no privilege level [level]
level : <1-15>, the privilege level, 1 for the lowest level and 15 for the highest.
Command Mode
Line configuration
Default
15
Usage
None
Examples
The following example assigns default privilege level to 1.
Switch(config-line)# privilege level 1
The following example returns the privilege level to default value.
Switch(config-line)# no privilege level
Related Commands
None
4.8 bandwidth
Use this command to set the bandwidth of the port.
To return the bandwidth to default value, use the no form of this command.
Command Syntax
bandwidth bandwidth
no bandwidth
bandwidth :<1-10000000> port bandwidth, in kilobits
Command Mode
Interface configuration
Usage