CANOGA PERKINS CanogaOS Command Reference - Manual (Page 781)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 781 of 855
Related Commands
debug dhcp snooping
40.48 debug dhcp snooping
To display debugging information about the Dynamic Host Configuration Protocol (DHCP) snooping
and to monitor the status of DHCP packets, use the debug dhcp snooping command in privileged
EXEC mode. To disable debugging output, use the no form of this command.
Command Syntax
debug dhcp snooping {all | dump | error | events | packet}
no debug dhcp snooping {all | dump | error | events | packet}
all
Debug all information of DHCP snooping.
dump Specify the output as format of Hexadecimal.
error Debug error information of DHCP snooping.
events Debug events of DHCP snooping.
packet Decodes DHCP receptions and transmissions.
Command Mode
Privileged EXEC
Usage
Examples
The following example shows a combination of DHCP snooping events and decoded receptions and
transmissions::
Switch# debug dhcp snooping events
Switch# debug dhcp snooping packet
Related Commands
debug dhcp relay
40.49 debug igmp
To display Internet Group Management Protocol (IGMP) packets received and sent, and IGMP-host
related events, use the debug ip igmp command in privileged EXEC mode. To disable debugging
output, use the no form of this command.
Command Syntax
debug igmp {all | decode | encode | events | fsm | tib}