CANOGA PERKINS CanogaOS Command Reference - Manual (Page 363)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 363 of 855
18.12 TRACK
To configure an track object, use the track to command in global configuration mode.
18.12.1.1 Command Syntax
track objected
18.12.1.2 Syntax Description
objectid Object identity is used to identify track object, its range is
from 1 to 500;
18.12.1.3 Command Mode
Global configuration
18.12.1.4 Defaults
none
18.12.1.5 Examples
In the following example, the track command is used to create an track object:
Switch(config)#track 1
Switch(config-track)#
18.12.1.6 Related Commands
Show track
18.13 DELAY UP
To specify a period of time (in seconds) to delay communicating state changes of a tracked
object, use delay up in track mode. To come back to default value, use the no form of this
command.
18.13.1.1 Command Syntax
delay up seconds
no delay up
18.13.1.2 Syntax Description
seconds Time range is from 1 to 180.