CANOGA PERKINS CanogaOS Command Reference - Manual (Page 748)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 748 of 855
40.7 ip ssh server version
To configure Secure Shell (SSH) version on your switch, use the ip ssh server version command in
global configuration mode. To restore the default value, use the no form of this command.
Command Syntax
ip ssh server version {1 | 2 | all}
no ip ssh server version
1 Switch runs only SSH Version 1.
2 Switch runs only SSH Version 2.
all Version 1 and Version 2 are both supported.
Default
The default SSH version is 2.
Command Mode
Global configuration
Usage
You can use this command with the 2 keyword to ensure that your switch will not inadvertently
establish a weaker SSH Version 1 connection.
Examples
The following example shows that only SSH Version 1 support is configured:
Switch(config)# ip ssh server version 1
The following example shows that only SSH Version 2 is configured:
Switch(config)# ip ssh server version 2
The following example shows that SSH Versions 1 and 2 are configured:
Switch(config)# no ip ssh server version
Related Commands
show ip ssh server status
40.8 show ip ssh server session
To display the session information for Secure Shell (SSH), use the show ip ssh server session
command in Privileged EXEC mode.
Command Syntax
show ip ssh server session