CANOGA PERKINS CanogaOS Command Reference - Manual (Page 835)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 835 of 855
Examples
The following is sample output from the snmp-server notify command:
Switch(config)# snmp-server notify note tag tt
Related Commands
show snmp-server notify
44.8 snmp-server system-contact
To set the system contact (sysContact) string, use the snmp-server system-contact command in
global configuration mode. To remove the system contact information, use the no form of this
command.
Command Syntax
snmp-server contact text
no snmp-server contact
text String that describes the system contact information.
Default
No system contact string is set.
Command Mode
Global configuration
Usage
Examples
The following is an example of a system contact string:
Switch(config)# snmp-server system-contact [email protected]
Related Commands
snmp-server system-location
44.9 snmp-server system-location
To set the system location string, use the snmp-server system-location command in global
configuration mode. To remove the location string, use the no form of this command.
Command Syntax
snmp-server system-location text