CANOGA PERKINS CanogaOS Command Reference - Manual (Page 787)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 787 of 855
ping
40.56 boot system
To specify the system image that the switch loads at startup, use one of the following boot system
commands in privileged EXEC mode.
Command Syntax
boot system file-name
file-name The file name that will be used to load at starup.
Command Mode
Privileged EXEC
Usage
Examples
The following example is sample dialog from the boot system command.
Switch# boot system flash:/boot/
Internal-1.0.0.25.img
Related Commands
show boot
40.57 reload
To reload the operating system, use the reload command in privileged EXEC mode.
Command Syntax
reload
Command Mode
Privileged EXEC
Usage
The reload command halts the system. If the system is set to restart on error, it reboots itself. Use the
reload command after configuration information is entered into a file and saved to the startup
configuration.
Examples
The following example is sample dialog from the reload command.