CANOGA PERKINS CanogaOS Command Reference - Manual (Page 789)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 789 of 855
Command Syntax
schedule reboot delay {HH:MM | minutes}
no schedule reboot
HH:MM The hour and minutes. The time range is 00:00 – 23:59.
minutes The minutes. The range is 1 – 720.
Default
No scheduled reboot task is defined.
Command Mode
Global configuration
Usage
Examples
The following example is sample dialog from the schedule reboot delay command.
Switch(config)# schedule reboot delay 300
Related Commands
schedule reboot at
40.60 show boot
To display the current image and the image the next startup will load, use the show boot command in
privileged EXEC mode.
Command Syntax
show boot
Command Mode
Privileged EXEC
Usage
Examples
The following is sample output from the show boot command.
Switch# show boot
The current boot image is: T024-E0001.img
The next time boot image is: Internal-1.0.0.25.img