CANOGA PERKINS CanogaOS Command Reference - Manual (Page 605)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 605 of 855
30.11 vpls-fib-add
Use this command to add a static PW for a PE in a VPLS instance.
Note:
The peer should be added in VPLS instance use key-word “manual”.
Command Syntax
vpls-fib-add NAME peer A.B.C.D IN-LABLE OUT-LABEL
Syntax Description
NAME Identifying string for VPLS instance.
A.B.C.D IP address of PE.
IN-LABLE Incoming label, the range should be from 16 to 1048575.
OUT-LABEL Outgoing label, the range should be from 16 to 1048575.
Command Mode
Configure mode
Examples
In the following example, the vpls-fib-add command is used to add a static PW for a PE in a
VPLS instance:
Switch# configure terminal
Switch (config)# vpls-fib-add vpls1 peer 100.100.100.1 101 102
Related Commands
vpls-fib-delete