CANOGA PERKINS CanogaOS Command Reference - Manual (Page 412)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 412 of 855
Global configuration & Interface configuration
Usage
In the global configuration mode, this value sets the max num of groups allowed globally.
In the interface configuration, this value sets the max num of groups allowed on that interface.
Examples
This example shows how to set the max num of groups allowed to 1000 globally.
Switch(config)#ip igmp limit 1000
This example shows how to return the max num of groups to default value.
Switch(config)#no ip igmp limit
Related Commands
show ip igmp interface
21.6 ip igmp mroute-proxy
Use this command to set the mroute-proxy port on this interface.
To remove it, use the no form of this command.
Command Syntax
ip igmp mroute-proxy interface
no ip igmp mroute-proxy
interface: the interface name of the mroute-proxy port
Command Mode
Interface configuration
Usage
Only one mroute-proxy port can be set on the interface. When set it again, the new setting will
overwrite the old one.
Examples
This example shows how to set the mroute-proxy port to eth-0-1 on this interface.
Switch(config-if)# ip igmp mroute-proxy eth-0-1
This example shows how to remove the mroute-proxy port on this interface.
Switch(config-if)# no ip igmp mroute-proxy
Related Commands
ip igmp proxy-service