CANOGA PERKINS CanogaOS Command Reference - Manual (Page 451)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 451 of 855
Command Syntax
ip pim unicast-bsm
no ip pim unicast-bsm
Command Mode
Interface configuration
Usage
Interface will send BSM message to the whole pim domain by default.
Examples
This example shows how to enable sending and receiving of unicast BSM for backward compatibility.
Switch(config-if)# ip pim unicast-bsm
This example shows how to cancel this setting.
Switch(config-if)# no ip pim unicast-bsm
Related Commands
None
24.22 show ip pim sparse-mode bsr-router
Use this command to show the information of bootstrap router.
Command Syntax
show ip pim sparse-mode bsr-router
Command Mode
EXEC
Usage
None
Examples
This example shows how to display the information of bootstrap router.
Switch#show ip pim sparse-mode bsr-routers
Related Commands
None