CANOGA PERKINS CanogaOS Command Reference - Manual (Page 332)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 332 of 855
16.80 show ip bgp attribute-info
Use this command to show internal attribute hash information.
Command Syntax
show ip bgp attribute-info
Command Mode
Privileged Exec mode and Exec mode
Examples
This is a sample output from the show ip bgp attribute-info command displaying internal attribute
information.
Switch# show ip bgp attribute-info
attr[1] nexthop 0.0.0.0
attr[1] nexthop 10.10.10.10
attr[1] nexthop 10.10.10.50
16.81 show ip bgp cidr-only
Use this command to display routes with non-natural network masks.
Command Syntax
show ip bgp cidr-only
show ip bgp ipv4 PREFIX cidr-only
ipv4 Specifies the address family. The type of address family determines the routing table that is
displayed.
PREFIX = multicast|unicast
unicast Specifies a IPv4 unicast address family. This is the default option.
multicast Specifies a IPv4 multicast address family.
Command Mode
Privileged Exec mode and Exec mode
Examples
This is a sample output from the show ip bgp cidr-only command.
Switch# show ip bgp cidr-only
BGP table version is 0, local router ID is 10.10.10.50
Status codes: s suppressed, d damped, h history, p stale, * valid, > best, i -
internal
Origin codes: i - IGP, e - EGP, ? - incomplete