CANOGA PERKINS CanogaOS Command Reference - Manual (Page 839)

CanogaOS Command Line Reference Revision 1.02
Proprietary & Confidential Canoga Pertkins Metro Ethernet Switches Page 839 of 855
44.13 snmp-server version
To specify the support of SNMP version, use the snmp-server version command in global
configuration mode. To restore to the default value, use the no form of this command.
Command Syntax
snmp-server version {all | v1 | v2c | v3}
no snmp-server version
all Support all versions (v1, v2c, and v3).
v1 Support only v1 version.
v2c Support only v2c version.
v3 Support only v3 version.
Default
Support all SNMP versions.
Command Mode
Global configuration
Usage
Examples
The following is sample output from the snmp-server version command:
Switch(config)# snmp-server version all
Related Commands
show snmp-server version
44.14 snmp-server view
To create or update a view entry, use the snmp-server view command in global configuration mode.
To remove the specified Simple Network Management Protocol (SNMP) server view entry, use the no
form of this command.
Command Syntax
snmp-server view view-name {included | excluded} sub-tree
no snmp-server view view-name {included | excluded} sub-tree
view-name Label for the view record that you are updating or creating. The name is used
to reference the record.
included Configures the OID (and subtree OIDs) specified in sub-tree argument to be